$

Handled Bowl

$10.50
  • Everyday Low Price

    Description

    SB111 Handled Bowl in ready to paint, Soft-Fired, Cone 04, Stoneware Bisque. 

     8 W x 4 H x 6 D

    This item is unpainted.

    You are purchasing an unfinished, Ready to Paint, Piece of Ceramic Pottery

    Hand Glazed Bowl Combo

    Products Used

    Bisque

    • SB-111 Handled Bowl

    Color

    • SW-106 Alabaster
    • SW-125 Purple Mint
    • SW-127 Olivine
    • SW-128 Cordovan

    Decorating Accessories

    • CB-604 #4 Soft Fan
    • BT-910 Synthetic Sponges

    Additional Materials

    • Pencil
    • Slip Trailer (Xiem Studio Tools)

    Instructions

    1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
    2. Load a slip trailer with SW-128 Cordovan.
    3. On the inside edge of the bowl, make fat inverted loops with a slip trailer, two rows, it will be necessary to rest the bowl on an angle so the loop will keep its shape till the glaze is set. Apply 2 coats. Allow to dry
    4. Using a CB-604 #4 Soft Fan, apply 2 coats of SW-127 Olivine to the entire piece. Allow for your glaze to fully dry in between each coat.
    5. When the glaze is dry, apply 2 coats of SW-106 Alabaster to the entire piece. Recede the second coat on the outside of the bowl.
    6. After applying the 2nd coat of SW-106, and while the glaze is still wet, apply 1 coat of SW-125 Purple Mint to the entire piece. Recede from the bottom of the bowl for this coat.
    7. With a damp sponge, wipe off any excess glaze off the foot of bowl.
    8. Place un-stilted, on a high-fired, kiln washed kiln shelf.
    9. Fire to shelf cone 5/6.

    Reviews (0)

    Write a review

    Note: HTML is not translated!
        Bad           Good